AT&T DL72210 Quick Start Manual page 18

®
Bluetooth
To activate remote voice control:
1. Press VOICE.
-OR-
If you have two connected cell phones ->
2. When the handset plays the confirmation tone, speak toward the handset, and
then wait for feedback. Make reply to the voice app's feedback, if necessary.
CANCEL
3. Press
Refer to the online Complete user's manual for a list of troubleshooting tips on
using Remote voice control feature.
Caller ID
This product supports caller ID services offered by most telephone service
providers. The telephone stores caller ID information of the last 50 incoming calls in
the telephone base. This information is common to all devices.
Review and dial a number in the call log
1. Press CID on the handset in idle mode ->
2. Press HOME/FLASH or
line.
-OR-
Press CELL
Erase missed calls indicator in the call log
When the screen shows XX Missed calls, scroll the call log one by one, or press and
hold OFF/CANCEL on the handset in idle mode.
to exit.
/SPEAKER on the handset to dial with the home
on the handset to dial with the cell line.
/ to select a device.
/ to scroll through the list.
16