Steps
1. Align the screw holes on the processor fan and heatsink assembly with the screw holes on the system board.
2. As per the sequential order (1 < 2 < 3 < 4) tighten the four captive screws to secure the fan and heatsink assembly to the
system board.
3. Connect the processor fan cable to connector on the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Processor
Removing the processor
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
heatsink
About this task
The following images indicate the location of the processor and provide a visual representation of the removal procedure.
After working inside your
Before working inside your
assembly.
computer.
computer.
Disassembly and reassembly
39