5. Replace the screw (M2x3) that secures the wireless card to the system board.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Solid-state drive
Removing the 2230 solid-state drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
Steps
1. Remove the single (M2x3) screw that secures the 2230 solid-state drive to the system board.
2. Slide and lift the 2230 solid-state drive from the M.2 card slot on the system board.
Installing the 2230 solid-state drive
Prerequisites
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the installation
procedure.
22
Disassembly and reassembly
After working inside your
Before working inside your
computer.
computer.