Dell Vostro 5890 Service Manual page 50

Steps
1. Align the ports on the system board with the slots on the chassis and align the system board in place.
2. Replace the single (M2x4) standoff screw that secures the system board to the chassis.
3. Replace the eight (6-32) screws that secure the system board to the chassis.
4. Route and connect all the cables that you disconnected from the system board .
5. Align the screw holes on the ports bezel with the screw holes on the chassis.
6. Replace the single (6-32) screw that secures the ports bezel to the chassis.
Next steps
1. Install the processor.
2. Install the heatsink assembly.
3. Install the graphics card.
4. Install the 2280 solid-state
5. Install the 2230 solid-state
6. Install the memory module.
7. Install the wireless card.
8. Install the side cover.
9. Follow the procedure in
50 Disassembly and reassembly
drive.
drive.
After working inside your computer.