Additional Commands; Download/Uploading Configuration - ADTRAN Express XL User Manual

Additional Commands

Other commands available from the terminal mode are given below:
save Saves the configuration to non-volatile RAM (flash).
mac Returns the MAC address for the Express XL/XLT.
version Returns the firmware version and routing stack version.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the terminal screen for
capture.

Download/Uploading Configuration

The Express XL/XLT's configuration can be captured to a text file using the
download command. The text file can be edited if required. Upload of the
configuration can be accomplished by sending the text file to the Express XL/
XLT in terminal mode. A baud rate of 9600 is strongly recommended when
uploading. As soon as the upload has been completed, type "save" to save the
new configuration to flash. A "reset" command or power cycle 10 seconds af-
ter the save command is recommended to ensure that the new configuration
is complete.
61200070L1-1
Appendix E: Terminal Mode Commands
Express XL/XLT User Manual 147