Table of Contents
Advertisement
ADDITIONAL COMMANDS
Other commands available from the terminal mode are listed below:
Saves the configuration to non-volatile RAM (flash).
save
Returns the MAC address for the Express L768.
mac
Returns the firmware version and routing stack
version
version.
Resets the unit.
reset
Leaves terminal mode and returns to menus.
exit
Downloads complete configuration to the terminal
download
screen for capture.
DOWNLOAD/UPLOADING
CONFIGURATION
The Express L768's configuration can be captured to a text file using
the download command. The text file can be edited if required. Up-
load of the configuration can be accomplished by sending the text file
to the Express L768 in terminal mode. A baud rate of 9600 is strongly
recommended when uploading. As soon as the upload has been com-
pleted, type
to save the new configuration to flash. A
save
mand or power cycle 10 seconds after the save command is
recommended to ensure that the new configuration is complete.
61203192L1-20
Appendix E. Terminal Mode Commands
Express L768 User Manual
com-
reset
E-3
Advertisement
Table of Contents
