Advertisement
GET THE REAR COVER AND
CHECKING
PUT THE REAR COVER TO THE BEZEL
STICK ON THE LOCATION OF REAR
COVER WITH 1*PCS GOOEY AS LEFT
PIC SHOW
TEAR OFF 1*PCS CODE FROM FLOW
CARD AND STICK IT ON THE REAR
COVER
LOCK UP THE BEZEL AND REAR
COVER WITH TWO SCREWS(F3.0*8-B)
AS LEFT PICTURE SHOW
CHECKING THE STAND THEN PUT IT
TO PRODUCTION LINE
CHECKING THE SCREWS OF REAR
COVER WHETHER UNSTUCK
LOCK UP THE STAND WITH FOUR
SCREWS(M4.0*10-B)
INSERT THE VGA CABLE TO THE VGA
CONNECTOR
PUT THE BASE TO THE LCD
Advertisement
