Advertisement
TEAR OFF CODE FROM FLOW AND
STICK ON THE LOCATION, THEN
SCAN IT INTO THE TMS
GET LEFT BRACKET AND LOCKUP
THE PANEL WITH TWO
SCREWS(M3.0*3.0-I)
GET THE RIGHT BRACKET AND
LOCKUP THE PANEL WITH TWO
SCREWS(M3.0*3.0-I)
TURN OVER THE LCD AND TEAR OFF
THE PLASTIC FILM
GET THE FRONT BEZEL AND
CHECKING
PUT THE BEZEL TO PANEL AND STICK
THE PLASTIC FILM ON THE BEZEL
SCAN THE CODE OF FLOW CARD AND
POWER BOARD
LOCK UP THE RIGHT SIDE OF BEZEL
WITH THREE SCREWS(M3*3-I) AS
LEFT PICTURE SHOW
Advertisement
