Advertisement
LOCKUP THE LOCATION OF MAIN
BOARD BY THREE
SCREWS(F3.0*6.0-T) AS LFET
PICTURE SHOW
GET THE MYLAR CARD AND INSERT
IT TO THE SHIELDING
PUT THE SHIELDING ON FRONT OF
PRODUCTION LINE
GET THE PANEL AND TEAR OFF THE
GOOEY
TURE OVER THE LCD AND TEAR
OFF THE GOOEY
TEAR OFF THE PLASTIC FILM AND
CHECKING IF ANY SPOT AND SCRAPE
STICK ON THE PLASTIC FILM BY
GOOEY
TURE OVER THE LCD
Advertisement
