Honda EM10000K1 Manual page 32

dummyhead dummyhead
GENERATOR/CHARGING SYSTEM
From page 8-9
Disconnect the power coil 2P connector
.
Measure the resistance between the power
coil 2P connector
power coil side.
Resistance: 1.92 – 2.88 Ω
Normal
Remove the D-AVR unit (page 11-6).
Measure the resistance D-AVR 5P connector
D-AVR unit side No.1 terminal and
No.5 terminal.
Resistance: 1.0 kΩ minimum.
Normal
Check for open or short circuit in generator
wire harness and control panel wire harness.
8-8
terminals of the
Abnormal
Abnormal
Replace the charge/power coil (page 8-15).
Replace the D-AVR (page 11-6).