Honeywell HEIPTZ-2736-WI Quick Start Manual page 5

Explosion-proof ptz carema
Hide thumbs Also See for HEIPTZ-2736-WI:
Table of Contents

Advertisement

Ex
Safety Instruction
These instructions are intended to ensure that user can use the product correctly to
avoid danger or property loss.
The precaution measure is divided into Warnings and Cautions:
Warnings: Neglecting any of the warnings may cause serious injury or death.
Cautions: Neglecting any of the cautions may cause injury or equipment damage.
Warnings
 Grounding: The both internal and external earthing shall be connected reliably.
Ground wire cross-sectional area of not less than the phase connector cross-sectional
area level, at least 4mm
 All the electronic operation should be strictly compliance with the electrical safety
regulations, fire prevention regulations and other related regulations in your local
region.
 Use the power adapter, which is provided by normal company. Refer to the product
specification for the standard of the power adapter. The power consumption cannot
be less than the required value.
 Do not connect several devices to one power adapter as adapter overload may cause
over-heat or fire hazard.
Make sure that the power has been disconnected before you wire or install the PTZ
Camera.
 When the product is installed on wall or ceiling, the device shall be firmly fixed.
 If smoke, odors or noise rise from the device, turn off the power at once and unplug
the power cable, and then contact the service center.
 If the product does not work properly, contact your dealer or the nearest service
center. Never attempt to disassemble the PTZ Camera yourself. (We shall not assume
any responsibility for problems caused by unauthorized repair or maintenance.)
Cautions
Explosion-proof PTZ Camera·Quick Start Guide
Warnings Follow
these safeguards to
prevent serious
injury or death.
.
2
Cautions Follow these
precautions to prevent
potential injury or
material damage.
iv

Advertisement

Table of Contents
loading

Table of Contents