Table of Contents
Advertisement
Ex
3.2.2 Activation via SADP Software
SADP software is used for detecting the online device, activating the device, and
resetting the password.
Get the SADP software from the supplied disk or the official website, and install the
SADP according to the prompts.
Follow the steps to activate the PTZ Camera.
Steps:
1. Run the SADP software to search the online devices.
2. Check the device status from the device list, and select an inactive device.
Note:
The SADP software supports activating the PTZ Camera in batch. Refer to the user
manual of SADP software for details.
3. Create a password and input the password in the password field, and confirm the
password.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the security
of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4. Click Activate to save the password.
Note:
Explosion-proof PTZ Camera·Quick Start Guide
Select inactive device.
Figure 3-4 SADP Interface
Input and confirm
password.
8
Advertisement
Table of Contents
