Table of Contents
Advertisement
Ex
Activation via web browser, activation via SADP, and activation via client software are
supported. We will take activation via SADP software and activation via web browser as
examples to introduce the PTZ Camera activation.
3.2.1 Activation via Web Browser
Steps:
1. Power on the PTZ Camera. Connect the PTZ Camera to your computer or the
switch/router which your computer connects to.
2. Input the IP address into the address bar of the web browser, and enter the
activation interface.
Notes:
The default IP address of the PTZ Camera is 192.168.1.64.
The computer and the PTZ Camera should belong to the same subnet.
For the PTZ Camera enables the DHCP by default, you need to use the SADP
software to search the IP address.
3. Create a password and input the password into the password field.
STRONG PASSWORD RECOMMENDED– We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the
security of your product. And we recommend you reset your password
regularly, especially in the high security system, resetting the password
monthly or weekly can better protect your product.
4. Confirm the password.
5. Click OK to activate the PTZ Camera and enter the live view interface.
Explosion-proof PTZ Camera·Quick Start Guide
Figure 3-3 Activation Interface (Web)
7
Advertisement
Table of Contents
