Table of Contents
Advertisement
Installing the Firestones
The unit is supplied with firestones, 6lbs for PL42VO, 9lbs for the PL60VO
(order code HW1106). Remove the door as shown in the previous
Instruction. Follow these instructions to ensure all parts are removed or
replaced as required. Once the glass door is removed place the firestones
randomly across the pan and the burners as described.
Note: Only cover the burner with one layer of media
Firestones or another approved media must be installed before
operating the fireplace.
Figure 66 Installation of the firestones. (Ensure ONLY one
layer of firestones cover the burner surface).
Figure 67 Spreading the firestones evenly and make sure
there are no firestones covering the pilot.
XG0219 - 080421
WARNING
Figure 68 DO NOT place ANY firestones on top of the pilot
WARNING:
This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional or
alternative media, rock wool or other material in this appliance. The use
of additional or alternative materials may pose potential safety hazards,
damage to the appliance, and void manufacturer's warranty.
Installation
cover).
Page 25
Advertisement
Table of Contents
Troubleshooting
