Wiring Instructions (Remote Box To Main Control Box) - Montigo MAHANA PL42VO Installation & Maintenance Manual

Table of Contents

Advertisement

Wiring Instructions
(remote box to main control box)
A qualified electrician must install the remote control system.
Turn off all power and gas to fireplace.
WARNING
This remote control system must be installed exactly as outlined in
these instructions. Read all instructions completely before attempting
installation. Follow instructions carefully during installation. Any
modifications of this remote control or any of its components will void
the warranty and may pose a fire hazard.
1� Attach the remote control box within 3 feet of main control box� (the
remote receiver is attached with velcro and may have to be removed
to access mounting screw slots�
USE #8
Use #8 screws
SCREWS FOR
1
ITEM No.
PART No.
DESCRIPTION
4
4 "
for mounting
MOUNTING
1
EC1458
JUNCTION BOX 9100 NO TERM 125x167x82mm
2
HW2212
VELCRO, 1"x2.75" MATED HOOK/LOOP
RX5010-
3
ON/OFF 110V RECEIVER FOR TOUCHSCREEN REMOTE
RECEIVER
4
EC1462
NYLON STRAIN RELIEF CONNECTOR, 1/2"
19
2
32 "
MOUNTING
DIMENSIONS
(Shown w/o receiver)
MOUNTING
DIMENSIONS
(SHOWN w/o RECEIVER)
2� Locate the wire running from the remote receiver and remove the wire
nuts at the ends of the wires�
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF CANADIAN HEATING PRODUCTS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF CANADIAN HEATING PRODUCTS IS PROHIBITED.
XG0219 - 080421
QTY.
REV.
1
1
1
1
NAME
DATE
DIMENSIONS ARE IN INCHES
TOLERANCES:
18/08/2016
DRAWN BY
FRACTIONAL
1/32"
TWO PLACE DECIMAL
.015"
CHECKED BY
THREE PLACE DECIMAL
.005"
ALL BENDS ARE ASSUMED
MATERIAL
SIZE DWG. NO.
A
TO BE 90 UNLESS NOTED
FINISH
OTHERWISE.
SCALE
3� Feed the wire into the control box side�
4� Connect the wires shown above from the remote receiver to the wires
from the control box� Black to black, red to red, and white to white�
5� After the wires are connected, tighten the strain relief connector nuts�
P42 REMOTE CONTROL
ELECTRICAL BOX
REV.
ECA102
1:2
WEIGHT:
SHEET 1 OF 3
Installation
Loosen relief connector nuts before
feeding wire through
Page 19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mahana pl60vo

Table of Contents