Operating the roof air conditioner
9.10
When the sleep function is active, the set temperature is reduced by 1 °C
after one hour and by 2 °C after two hours to generate a pleasant tempera-
ture for sleeping.
9.11
When this function is active, the remote control measures the room tempera-
ture and transmits this measurement to the roof air conditioner every
10 minutes. The roof air conditioner adapts the target value to this measure-
ment.
54
Print to PDF
without this message by purchasing novaPDF (http://www.novapdf.com/)
Activating the sleep function
Set the required temperature (see chapter "Setting the temperature" on
page 51).
Press the SLEEP button.
The
symbol appears in the display.
The sleep function is activated.
Activating the "I feel" function
Press the I FEEL button.
Position the remote control so that it points at the IR receiver (fig.
page 3) on the control panel. Otherwise, the values cannot be transmitted
to the roof air conditioner.
NOTE
The remote control should not be kept in a part of the room that is
considerably warmer or colder than the average room temperature.
It may not, for example, be left in the sun or in front of the roof air
conditioner.
Dometic FreshJet 1100
4,
EN