Casio fx-9750GII User Manual page 321

- Clipboard and history data (Including the "SYSTEM" data item.)
- e • ACT mode data*
- S • SHT mode data*
* 1 Can be transferred from an fx-9860G
Slim (OS 2.00), fx-9860G SD (OS 2.00), fx-9860G (OS 2.00) or fx-9860G AU (OS 2.00)
calculator.
• Program data is transferred as-is.
However, any command in a transferred program that is not supported by the fx-7400G
will be replaced by the at sign (@). Running such a program on the fx-7400G
error.
Sending Data from an OS 2.00 Calculator to any Older Model Calculator
The following are general rules that apply when transferring data from an OS 2.00 calculator to
an fx-9860G series or CFX-9850G series calculator.
• The following data is not transferred.
- String memory data
- TVM mode bond calculation and depreciation calculation data
- STAT mode function and variable data for which there is no corresponding function for
variable on the receiving calculator model (Example:
etc.)
• The following data is converted by the OS 2.00 calculator to a format that is supported by the
receiving calculator model before it is sent.
- GRAPH mode, DYNA mode Graph Type setting data
When transferring to an fx-9860G series or CFX-9850G series calculator, X=, X>, X<, X ,
and X type expressions are converted to an X=c type expression
- Graph line type setting data
When sending to a CFX-9850G series calculator, line settings are converted as follows
before being sent: Normal: Blue; Thick: Orange; Broken, Dotted: Green.
- STAT mode Graph1, Graph2, and Graph3 setting data
When sending to an fx-9860G series calculator, pie and bar type graphs are converted to
ScatterPlot before being sent. Other settings are not sent.
• Program data is transferred as-is.
However, any command in a transferred program that is not supported by the other model
calculator will be replaced by the at sign (@). Running such a program on the other model
calculator will cause an error.
• Refer to the following if an error message appears on the OS 2.00 calculator when you are
sending data to another calculator model.
Invalid Data Size
- Matrix data exceeds 256 rows or 256 columns*
- List data exceeds 256 lines
- Table data exceeds 256 rows
- Recursion table data exceeds 256 lines*
- EQUA mode input data includes 4 to 6-degree equation
1
1
II
SD, fx-9860G
1 *
13-8
II
, fx-9860G AU PLUS, fx-9860G
2 GOF Test calculation result data,
1
3
II
II
will cause an