Casio fx-9750GII User Manual page 317

Only items that contain data appear on the data item selection screen. If there are too many
data items to fit on a single screen, the list scrolls when you move the cursor to the bottom line
of the items on the screen.
To execute a send operation
After selecting the data items to send, press
you want to execute the send operation.
• (Yes) ... sends data
• (No) ... returns to data selection screen
Press (Yes) to send the data.
• You can interrupt a data operation at any time by pressing
The following shows what the displays of the sending and receiving units look like after the
data communication operation is complete.
Press to return to the data communication main menu.
Configuring the Receiver's Wakeup Feature
When Wakeup is turned on the receiver, the receiver turns on automatically when data transfer
starts.
II
fx-7400G
• The receiver enters the receive mode automatically after it wakes up.
All models except fx-7400G
• When communicating between two calculators (3PIN selected as the cable type), the
receiver enters the receive mode automatically after it wakes up.
• When communication is with a computer (USB selected as the cable type), connecting the
USB cable to a computer and then to the calculator (while the calculator is turned off) will
cause the calculator to turn on and the "Select Connection Mode" dialog box to appear.
Sending Unit
II
(TRAN). A message appears to confirm that
.
Receiving Unit
13-4