Casio fx-9750GII User Manual page 275

4. Input the List number (1 to 26) of the list memory where you want to store the data and then
press .
• Performing the next step will overwrite any data currently stored under the list memory
number you specified here with the data in the range of cells specified by "CellRange".
5. Press (EXE) or the
Recalling Data from Memory to a Spreadsheet
The following table shows an overview of the recall operations for each type of memory. For
details about each operation, see the example operations following the table.
Memory Type
List Memory
(List 1 ~ List 26)
File Memory
(File 1 ~ File 6)
Matrix Memory
(Mat A ~ Mat Z)
Example: To recall data from a matrix memory to a spreadsheet
1. On the spreadsheet, select the upper left cell of the range where you want the recalled data
to be input.
2. Press ( ) (RCL)
• This will display a screen like the one shown to the right.
The "1st Cell" setting will show the name of the cell you
selected in step 1.
3. Input the name (A to Z) of the matrix memory whose data you want to recall and then press
.
4. Press (EXE) or
Important!
When recalling list memory, file memory, or matrix memory data, an error will occur if the
recalled data runs outside the allowable range of the spreadsheet (A1:Z999).
key to store the data.
You can recall data from a specified list memory to a range of
cells in a single row or a single column. While the first cell of
the range in a single row or single column is selected, press
( ) (RCL) (LIST), and then specify the list number on the
screen that appears.
Whether the data is recalled in a column direction or row direction
depends on the Setup screen's "Move" setting (page 1-29).
You can recall data from a specified file memory to the spreadsheet.
Select the cell you want to be the upper left corner of the recalled
data and then press
memory number on the screen that appears.
You can recall data from a specified matrix memory to the
spreadsheet. Select the cell you want to be the upper left corner of
the recalled data and then press
specify the matrix name on the screen that appears.
(MAT).
to recall the data.
9-21
Recall Operation
( ) (RCL) (FILE). Next, specify the file
( ) (RCL) (MAT). Next,