Advertisement
INSTALLATION PROCEDURES
Unpacking
Ensure all of the components are in the box before beginning
the installation of the Pentair® Everpure® ActivTapp ACS-1
system. In addition to this manual, you should have the system
and mounting hardware. Optional items you might have include:
water hookup hoses and water inlet bypass manifold.
Find a Mounting Location
Before beginning the installation, locate a suitable location for
the system and the water inlet bypass manifold (optional). Find
a flat portion of a wall, preferably close to the location where
ozonated water is needed. Please consider the following when
selecting a mounting location:
1. Never install the system in an area where water may freeze.
Freezing water will damage the internal components.
2. Mount vertically, as shown in Figure 1.
3. The system should be close enough to a power outlet so an
extension cord is not necessary.
4. Mounting the system and the water inlet bypass manifold
SHOULD NOT obstruct any electrical outlets.
5. The ACS-1 system and water inlet bypass manifold should be
close enough to the unit using the ozonated water to make
the proper water hose connections.
4 • Pentair® Everpure® ActivTapp ACS-1 Installation and Operation Guide
Figure 1– Mounting Location
Figure 2 – Complete Finished Installation ACS-1
Advertisement
