Advertisement
WARNING
Read all instructions and warnings before installing or operating
this product - Call 805-549-9724 for additional free copies of this
manual.
IMPORTANT - PLEASE READ
• This installation and operation guide is written to assist in the
installation, operation, and maintenance of the ACS -1 product.
• Please read this manual carefully and in its entirety before
proceeding with any installation, operation, or maintenance
procedure associated with this equipment. Failure to follow
these instructions could result in personal injury, damage to the
equipment, or reduced product performance.
• In an ongoing effort to improve reliability and operating
efficiency, ClearWater Tech, LLC may find it necessary to make
changes to its products. Therefore, the information contained
in this manual may not conform in every respect to earlier
versions of ClearWater Tech, LLC systems found in the field. If
you have any questions, please contact the ClearWater Tech,
LLC service department at service@cwtozone.com.
TABLE OF CONTENTS
SAFETY...........................................................................................2
THEORY OF OPERATION..................................................................3
INSTRUCTIONS ...............................................................................3
INSTALLATION PROCEDURES.........................................................4
FIGURE 1 - FINDING A MOUNTING LOCATION ........................4
FIGURE 2 - COMPLETE FINISHED INSTALLATION..................4
FIGURE 3 - MOUNTING THE UNIT...........................................5
FIGURE 4 - MOUNTING THE INLET BYPASS MANIFOLD..........5
APPENDIX A - SPECIFICATIONS.............................................6
APPENDIX B - SPECIFICATIONS.............................................7
WARRANTY INFORMATION.....................................................8
2 • Pentair® Everpure® ActivTapp ACS-1 Installation and Operation Guide
SAFETY
This Pentair® Everpure® ActivTapp ACS-1 rinse system must
be installed by a licensed professional in accordance with all
applicable codes and standards for the jurisdiction in which it is
installed. In addition, all plumbing attached to or used with ACS-1
must be installed by a licensed, professional plumber.
This section of the manual contains safety warnings
WARNING:
and must be read, understood, and applied during
installation, operation, and maintenance of the ACS-1
system. When used under reasonable conditions and in
accordance with the directions for safe use, the ACS-1
system should not present a health hazard. Failure
to follow the warnings and operation instructions
herein may present potential health and safety hazards
resulting in death or serious bodily injury to personnel
and damage to the equipment. The safety information
contained in this manual is intended to be read
thoroughly.
Inspect the ACS-1 system regularly for cracks or other
damage. Cracks and damage can result in leakage or
rupture failure. If the damage is found, immediately
shut down the system until the damage has been
thoroughly inspected and repaired. Do not continue to
operate the system.
Ozone is a colorless gas with a strong odor. Ozone can
DANGER:
be hazardous and can cause severe respiratory toxicity.
Breathing ozone can damage the lungs and cause
headaches, chest pain, coughing, shortness of breath,
and throat irritation. Higher exposure can cause fluid
buildup in the lungs (pulmonary edema). Ozone can also
worsen chronic respiratory diseases such as asthma
and compromise a person' s ability to fight respiratory
infections. In the event of ozone leakage, move to fresh
air immediately.
Ensure any cleaning, repair, or ozone equipment is
done by qualified, correctly trained personnel.
GROUNDING INSTRUCTIONS: This system must be
WARNING:
grounded. In the event of a malfunction or breakdown,
grounding will reduce electric shock risk by providing
a path of least resistance for electric current. This
system is equipped with a cord having a system-
grounding conductor and a grounding plug. The plug
must be plugged into an appropriate outlet installed
and grounded in accordance with all local codes and
ordinances.
Improper connection of the system-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrician or service representative if
you doubt whether the system is properly grounded. Do
not modify the systems plug; if it does not fit the outlet,
have a proper outlet installed by a qualified technician.
Children should be supervised to ensure that they do
WARNING:
not play with the system.
Advertisement
