Cardo Systems Scala-rider TeamSet Quick Manual page 13

Cannot terminate calls using
the intercom button
Can't answer phone calls
using the Voice Command
(VC) feature.
I cannot perform redial
3. Verify that the scala-rider headset is the paired
headset to your phone.
4. Reconnect the phone and headset by short
pressing the Control Button on the headset, or
connecting them manually by using your
phone's menu.
5. Check the definitions and settings on your
phone.
6. Repeat the pairing process as described in
TURNING THE DRIVER HEADSET ON FOR
THE FIRST TIME, page 5.
Your phone supports only the Bluetooth headset
profile and not the handsfree profile. Therefore
you must use the Control button to answer or
terminate calls.
1. Make sure that you speak the word loudly after
prompting
2. Close the helmet visor.
3. Make sure that the VC feature is activated (see
Driver's Unit Functions, page 9)
4. The VC feature works well while driving up to
70 km/h or 44 mph with a 3/4 helmet and up to
120 km/h or 75 mph with a closed full faced
helmet. High-end helmets may get better results.
1. Make sure that the call list on your phone is
not empty.
2. The Redial feature works only with mobile
phones that also support the Bluetooth
handsfree profile. Check whether your phone
supports this profile.
13