Q-solo
Manual
INDEX
I M P O R T A N T :
This is version 1.0 of the User
Manual. Please note, that our
manual is periodically updated
on the Cardo website to include
the ver y latest features and
functions of your new scala rider.
INTRODUCTION
1
Thank you for choosing the scala rider Q-solo Bluetooth® headset
for motorcycle helmets. This manual will help you set up, configure
and operate it.
CHARGING THE SCALA RIDER
Make sure that your scala rider is fully charged for at least 4 hours
2
before initial use.
Charging with a 5v wall charger is faster than charging with a
computer USB port.
•
RED
LED ON – Charging
•
RED
LED OFF – Charging complete
3.1 STATUS LIGHTS
None
The
BLUE
3
GETTING
The
BLUE
STARTED
The
RED
The
RED
Solid
All manuals and user guides at all-guides.com
™
1
INTRODUCTION
2
CHARGING THE SCALA RIDER
3
GETTING STARTED:
3.1
STATUS LIGHTS,
4
PAIRING AND USING A MOBILE PHONE, GPS DEVICE OR ANY MUSIC PLAYERS:
4.1
PAIRING BLUETOOTH ,
4.2
5
TROUBLESHOOTING
6
SUPPORT
LED flashes once every 3 seconds
LED flashes twice every 3 seconds
LED flashes once every 3 seconds
LED flashes twice every 3 seconds
RED
3.2
GENERAL FUNCTIONS,
MAKING AND RECEIVING PHONE CALLS,
The scala rider Q-solo is waterproof and dustproof. However,
when in use, the USB silicone cover should be kept tightly closed
to prevent moisture from entering the unit.
scala rider is OFF
Standby mode. No active audio sources
Active mode – Call in progress / music or other audio source is ON
Standby mode – Battery is low
Active mode – Battery is low
Charging
3.3
VOX ACTIVATION
4.3
LISTENING TO MUSIC VIA A2DP
1.
Power Button
2.
LED Indicator
3.
Music / Mobile Button
4.
Volume Up
5.
Charging
6.
Volume Down
scala rider
Q-solo
®