Attaching The Embroidery Frame; I Removing The Embroidery Frame - Brother NC21SE Operation Manual

ATTACHING THE EMBROIDERY FRAME

ATTACHING THE EMBROIDERY FRAME

Note
Wind and insert the bobbin before attaching the embroidery frame.
a a a a
Press the "Presser Foot Lifter" button to
raise the presser foot.
b b b b
Align the embroidery frame guide with the
right edge of the embroidery frame holder.
b
a Embroidery frame holder
b Embroidery frame guide
c c
c c
Slide the embroidery frame into the holder,
making sure to align the embroidery frame's
with the holder's
a Arrow mark
162
a
.
a
d d d d
Lower the frame-securing lever to be level
with the frame to secure the embroidery
frame in the embroidery frame holder.
a
a Frame-securing lever
CAUTION
• If the frame-securing lever is not lowered, the
embroidery pattern may not sew out correctly
or the presser foot may strike the embroidery
frame and cause injury.

I Removing the Embroidery Frame

a a a a
Raise the frame-securing lever.
b b b b
Pull the embroidery frame toward you.