I Hemstitching (3) (Drawn Work (2)) - Brother NC21SE Operation Manual

SEWING THE STITCHES
d d d d
Press
stitch.
e e e e
Sew the opposite side to keep the stitch
symmetrical.
96
to create a mirror image of the
N

I Hemstitching (3) (Drawn Work (2))

a a a a
Pull out several threads from both sides of
the 4 mm (approx. 3/16 inch) area which
are not yet open.
* Pull out four threads, leave five threads, and then
pull out four threads. The width of five threads is
approximately 4 mm (approx. 3/16 inch) or less.
b
c
b
a Approx. 4 mm (approx. 3/16 inch) or less
b Four threads (pull out)
c Five threads (leave)
b b b b
Select .
Memo
For details on each stitch, refer to the
"STITCH SETTING CHART" at the end of this
manual.
c c c c
Sew the decorative stitch in the center of
the five threads created above.
N
Memo
A wing needle can be used for Hemstitching
(3).
a