Changing The Length (For 7Mm Satin Stitch Patterns Only); Creating A Vertical Mirror Image; Creating A Horizontal Mirror Image; Sewing A Pattern Continuously - Brother NC21SE Operation Manual

Changing the Length (for 7mm
Satin Stitch Patterns Only)
When stitch patterns are selected, press
choose from 5 automatic length settings, without
changing the stitch zigzag width or stitch length
settings.

Creating a Vertical Mirror Image

To create a vertical mirror image, select a stitch
pattern then press
to
.
EDITING STITCH PATTERNS
Creating a Horizontal Mirror
Image
To create a horizontal mirror image, select a stitch
pattern then press

Sewing a Pattern Continuously

Press to select continuous sewing or single
stitch sewing.
Memo
To finish a complete motif while sewing the
pattern continuously, you can press the
key while sewing. The machine will automati-
cally stop when the motif is finished.
.
4
125