Lcd Screen - Brother NC21SE Operation Manual

LCD SCREEN

When switching on the machine, the screen will display the name of the machine. Touch the screen to
display the utility stitch. Either "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is selected,
depending on the setting selected in the setting screen (see page 16).
Press a key with your finger to select the stitch pattern, to select a machine function, or to select an
operation indicated on the key.
Note
• When the straight stitch needle plate is on the machine, the needle will automatically move to the mid-
dle position.
Memo
• Only touch the screen with your finger or the included touch pen. Do not use a sharp pencil, screw-
driver, or other hard or sharp object. It is not necessary to press hard on the screen. Pressing too hard
or using a sharp object may damage the screen.
a Shows single or twin needle mode setting, and the needle stop position.
b Shows the presser foot code. Attach the presser foot indicated in this display before sewing.
c Shows the name and code number of the selected stitch.
d Shows a preview of the selected stitch.
e Shows the stitch patterns.
f Shows additional pages that can be displayed.
* All key functions of the LCD are explained in the "key functions" table on the following page.
a
b
c
d
Single needle/down position
Twin needle/down position
e
f
Single needle/up position
Twin needle/up position

LCD SCREEN

1
11