Advertisement
Step 5:
Repeat steps 3 and 4 until you have programmed all your
desired step for your new program. You may program up
to 100 steps per a program pattern chase.
Step 6:
When you have completed your programming press the
Blackout Button to exit program mode.
Slider Programming:
scenes or chase patterns with varying light level intensities. These programs
may be stored into any of the 16 user Pattern Buttons. This programming pro-
cedure may also be combined with the "Quick Start" programming instructions
Step 1:
Press the Program and Manual Buttons until there green
indicator LEDs light up. Please note: If the program LED
indicator does not light up, the controller is in Lock Mode.
To unlock the controller please see "Lock Function" in this
manual, page 22
Step 2:
Select a pattern bank (Program Buttons 1-16) you wish to
store your program to. Press the Pattern Button and its
LED will begin flashing slowly indicating program ode has
been activated.
American DJ Supply
www.americandj.com Stage Desk-16™ Instruction Manual Page 13
©
®
All manuals and user guides at all-guides.com
Operation Cont.
Note this function allows you to program static
Step 3:
Use the slider to adjust your desired c
The channels intensity will vary dependin
of the slider. When the slider is set to zer
no channel activity, if the slider is set to
the channel activity will be at it's maximu
play will also detail the channel fader le
of zero to 100.
Step 6
Step 4:
After you have set all your desired chann
a scene or chase step, press the Progra
this scene into the controllers memory.
Step: 5
Repeat steps three and four until you
a 100 steps or until have programmed
step.
Step: 6
When you have completed all your steps
press the Blackout Button to exit this fu
matically end the program function.
Step 1
Step 2
American DJ Supply
©
www.americandj.com Stag
®
Advertisement
