Canon CanoScan 9950F Quick Start Manual page 16

Scanning Film
7
Select the [Output Size].
You can select from the following options.
• If you selected [Print (300 dpi)] in Step 6, you can select
Flexible, 4"x6", A4, and Letter to match the size of the
paper for printing.
• If you selected [Image display (150 dpi)] in Step 6, you
can select Flexible, 640 x 480, 800 x 600, 1024 x 768,
1600 x 1200 and 2048 x 1536 to match the sizes used by
computer monitors and digital cameras.
8
Click [Scan].
The final scan will start.
If you have failed scanning with ArcSoft PhotoStudio,
scan fewer frames or use CanoScan Toolbox/Adobe
Photoshop Elements as the parent application
program, and rescan.
See Troubleshooting in the Scanning Guide.
When the scan is complete, click the ScanGear CS
(Windows) or
The scanned image will appear in ArcSoft PhotoStudio.
9
Save the scanned image.
Click the [File] menu and select [Save As]. Select the folder where you wish to store the image file, enter
a file name, select a file type (JPEG format is recommended) and click [Save].
10
Click close box
• If the scanner does not perform as described above, read the "Troubleshooting"
section of the Scanning Guide (HTML format manual).
• For details about the bundled software programs, read the Scanning Guide or the
User Guides (PDF format manuals) for each software program on the CanoScan Setup
Utility CD-ROM.
16
(Macintosh)
.
(Windows) or (Macintosh) in the PhotoStudio window to close it.
close box