Canon CanoScan 9950F Quick Start Manual page 15

Scanning Film
The following steps explain how to scan 35 mm film strips with ArcSoft PhotoStudio.
Use ScanGear CS's Advanced Mode to scan 120 or 4" x 5" format films.
1
Start ArcSoft PhotoStudio.
Refer to step 2 on page 8.
2
Start ScanGear CS.
Refer to step 4 on page 9.
3
Select the [Select Source].
You can select from the following options for films.
Negative Film (Color) / Positive Film (Color)
4
Click [Preview].
ScanGear CS will display the preview image(s).
5
Place a check mark beside the number(s) of the
frame(s) to be scanned.
By default, a check mark appears beside the first frame only.
You can scan multiple frames in one step if you place a check
mark beside the number of each frame you wish to include.
6
Select the [Destination].
You can select [Print (300 dpi)] or [Image display (150 dpi)].
Scanning Film
15