4.3. Editing Display and Operation Settings
You may adjust the display settings and UPS configuration via the LCD. The display and operation settings are
password protected. The default password is 111111 (six ones).
• We recommend that you change the password to protect your system and equipment and record the
new password and store it in an accessible location for later retrieval. See
the next page.
To enter the password:
1. Press the up-arrow button to change the digit shown, then press the down-arrow button to move to the next
digit.
2. Repeat to select each digit, and press Enter to submit the password.
Figure 4-9 Password Prompt
4.3.1. Settings Prompts
While using the operation and display panel, prompts display to alert you to specific conditions or require
confirmation of commands or settings.
Vertiv | Liebert® GXT5™ | Installer/User Guide
Table 4-5
lists the prompts and their meaning.
Changing the Password
on
77