Attaching The Embroidery Foot - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 131 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Attaching the embroidery foot

Attachment of the embroidery foot is explained here.

Attaching the embroidery foot

Attach the embroidery foot when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
Embroidery foot bar
Caught by the presser foot holder
CAUTION
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and break or bend.
Press (Needle position button) once or
twice to raise the needle.
The needle goes up.
Turn off the sewing machine.
CAUTION
● Before replacing the presser foot, be sure
to turn off the sewing machine, otherwise
injuries may occur if the start/stop button
is accidentary pressed and the machine
starts sewing.
Raise the presser foot lever.
The presser foot is raised.
• At the time of purchase, the presser foot lever
is up.
Press and hold the black button on the back of
the presser foot holder to release it.
Black button
Presser foot holder
Detach the presser foot from the presser foot
holder.
Attaching the embroidery foot 131