Appliquéing - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 152 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
Appliquéing
With embroidery patterns that display "APPLIQUE",
you can appliqué. Prepare the base fabric and the
appliqué fabric (appliqué piece).
Select an appliqué pattern.
When "APPLIQUE MATERIAL" is displayed on
the LCD, apply the stabilizer material to the
back of the appliqué piece fabric, and stretch
it on the embroidery frame.
Lower the presser foot lever, and press
(Start/stop button).
The cut-out for the appliqué piece is sewn,
and the sewing machine stops.
Cut-out line
Appliqué piece fabric
"APPLIQUE POSITION" will be displayed on
the LCD.
152
Remove the fabric from the embroidery frame,
and cut it out along the stitching.
Cut carefully along the stitching and remove
the thread.
• If it is not cut right on the stitching, it will not
be finished neatly.
Stretch the base fabric on the embroidery
frame.
Set up the thread for appliquéing.
Lower the presser foot lever, and press
(Start/stop button).
The position for the appliqué is stitched, and
the sewing machine stops.
Appliqué position
Base fabric
"APPLIQUE" will be displayed on the LCD.
Apply a thin layer of fabric glue or spray
adhesive to the back of the appliqué piece, and
attach it in the appliqué position.