Mirroring Stitches - Brother HE 120 Operation Manual

SE-BrotherE_sgml.book Page 61 Monday, June 30, 2003 3:44 PM
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Set the fabric in place, and press
stop button) once.
Stitching starts after reverse stitching or
reinforcement stitching.
Once you have reached the end of the
stitching, press
stitch button) once.
If stitching, such as buttonholes and bar
tacking, that includes reinforcement stitching
has been selected, this operation is
unnecessary.
After the reverse stitching or reinforcement
stitching has been done, the sewing machine
stops, and the thread is cut.
Memo
Programmed thread-cutting will not be
performed if the start/stop button is pressed
while sewing. Press the reverse/
reinforcement stitch button at the end of the
stitching.
If the power is turned off, programmed
thread-cutting will be turned off.
(Start/
(Reverse/reinforcement
The thread is cut here.

Mirroring stitches

You can sew the mirror image of a stitch horizontally
(left and right).
Turn on the sewing machine.
The LCD comes on.
Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 47).
Press on the LCD.
■ For groups other than utility stitches
It turns to , and the pattern is mirrored.
• To turn the mirrored stitching off, press
Memo
Mirroring is not possible for buttonholes and
other stitches where
When the sewing machine is turned off, the
mirroring setting is cancelled.
.
shows.
Useful Functions 61