Canon PIXMA iP3000 Series Quick Start Manual page 83

Problem Possible Cause
Printer is not ready
"Error No.: 300" *
Printer is not
properly connected
Specified printer
name is not on the
print list under
Printer Setup Utility
(P P rint Center)
Waste ink absorber
almost full
"Error No.: 1700"*
Inner Cover is open
when printing
"Error No.: 1851"* starts
Inner Cover is
opened while
"Error No.: 1856"*
printing
A specified period
of time has elapsed
"Error No.: 2001"* without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
Automatic Print
Head alignment
"Error No.: 2500"*
failed
* When using Mac OS 9.x, a character is displayed before the error number.
Ensure that the P P OWER lamp lights green.
If the P P OWER lamp is off, turn the printer on.
The P P OWER lamp will flash green when the printer is initializing. Wait until the
POWER lamp stops flashing.
When the P P OWER lamp is flashing orange, an error may occur in the printer. For
details on how to resolve the error, refer to
75.
Ensure that the printer is securely connected to the computer.
If using a switching hub or other device, disconnect the printer
and reconnect it directly to the computer and try printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
1. Select Application from the G G o menu.
2. Double-click P P rinter Setup Utility in the U U tility folder.
When using versions of Mac OS other than Mac OS X v.10.3.x, double-click
the P P rint Center icon.
3. Ensure that the name of your printer is indicated in the printer list.
If the name of your printer does not appear in the printer list, carefully follow
the procedures described in the
driver.
The printer has a built-in waste ink absorber to hold the ink used during print
head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the R R ESUME/CANCEL button to clear the error so you can continue
printing. Before the waste ink absorber becomes completely full, contact the
Customer Care Center.
Close the Inner Cover, then press the R R ESUME/CANCEL button.
Close the Inner Cover, then press the R R ESUME/CANCEL button. Try printing
again.
Disconnect the camera cable, press the R R ESUME/CANCEL button on the printer
and reconnect the cable.
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Use a
digital camera or digital video camcorder compatible with this printer.
See "Eleven flashes" in "H H andling Error Messages"
Troubleshooting
Try This
"H H andling Error Messages"
Easy Setup Instructions and reinstall the
on page 75.
on page
79