Canon PIXMA iP3000 Series Quick Start Manual page 29

• Layout ....................Borderless
• Trimming ................Off (No trimming)
• Image optimize .......On (ExifPrint)
• Date print................Off (No printing)
Additional settings
The settings explained below cannot be made on some cameras. If any setting
cannot be made, the default setting explained above is used.
Names of settings that are displayed on Canon PictBridge-compatible cameras are
used in the description given below. Different names may be displayed on your
camera depending on the brand or model.
For details, refer to your camera's instruction manual.
About "Paper size" and "Paper type"
To change the paper size or paper type, operate from the camera to select the
PictBridge print setup mode and confirm or check the settings.
By default, 4 4 " x 6" is selected from P P aper size and P P hoto (Photo Paper Plus Glossy) is
selected from P P aper type for this printer. To use Photo Paper Pro, select F F ast Photo from
Paper type.
If using a Canon PictBridge-compatible camera, you can select 5 5 " x 7" from P P aper size.
The following sizes and types of paper can be loaded in the printer by selecting options
from P P aper size and P P aper type.
"Paper size" setting
10 x 15 cm/4" x 6"
(Default)
13 x 18 cm/5" x 7"
A4/8.5" x 11" (Letter)
When 4 4 " x 6" is selected from P P aper size, "2-up", "4-up", "9-up", and "16-up" options
may be available in L L ayout.
"Paper type" setting
Photo (Default)
Fast Photo
Photo
Photo
Photo
Photo
Fast Photo
Photo
Photo
Advanced Printing
Paper loaded in printer
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Semi-gloss
Glossy Photo Paper
Photo Paper Plus Glossy
Photo Paper Plus Glossy
Photo Paper Pro
Photo Paper Plus Semi-gloss
Glossy Photo Paper
25