Canon PIXMA iP3000 Series Quick Start Manual page 77

Canon pixma ip3000: quick start
Hide thumbs Also See for PIXMA iP3000 Series:
Table of Contents

Advertisement

Problem
Possible Cause
Paper Jams
Paper jams inside
the Transport Unit
Remove the paper according to the following procedure.
1. Open the Rear Cover.
2. When you can see the jammed paper, slowly pull the paper out.
Be careful not to touch the components inside the printer.
If you cannot extract the paper, turn the printer off, and then turn it back on.
The paper will be ejected automatically.
3. Close the Rear Cover.
4. If you could not extract the paper in step 2, remove the Cassette.
5. Slowly pull the jammed paper out.
6. If any paper is sticking out of the Cassette, reload the paper in the Cassette.
7. Reload the paper in the Sheet Feeder if necessary, and press the R R ESUME/
CANCEL button on the printer.
When reloading the paper into the printer, refer to
Feed Properly"
paper and are loading it into the printer correctly.
If you have turned off the printer in step 2, you will need to retry
printing, because this operation cancels any print jobs in progress.
If you cannot remove the paper or if the paper tears inside the printer,
or if the paper jam error continues after removing the paper, contact
the Customer Care Center.
Try This
on page 71 to confirm that you are using the correct
Troubleshooting
"P P aper Does Not
73

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pixma ip4000 series

Table of Contents