Brother Computerized Embroidery Sewing Machine Operation Manual page 42

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
d Hold the needle with your left hand, and then
use a screwdriver to turn the needle clamp
screw counterclockwise to remove the needle.
a Screwdriver
b Needle clamp screw
• Do not apply a strong force when loosening
or tightening the needle clamp screw,
otherwise certain parts of the sewing
machine may be damaged.
With the flat side of the needle toward the rear
e
of the machine, insert the needle until it
touches the needle stopper.
1
a Needle stopper
f While holding the needle with your left hand,
use the screwdriver to tighten the needle
clamp screw.
Install the twin needle in the same way.
36
1
2
CAUTION
● Be sure to insert the needle until it
touches the needle stopper and securely
tighten the needle clamp screw with the
screwdriver, otherwise the needle may
break or damage may result.
■ Using the needle-changing tool
Use the needle-changing tool to replace the
needle as described below.
a Place the needle in the hole in the needle-
changing tool.
Lift up the needle-changing tool so that the
b
fork hooks onto the needle clamp screw.