Brother Computerized Embroidery Sewing Machine Operation Manual page 158

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
Symptom
Nothing appears The brightness of the LCD is either
in the LCD. too light or too dark.
Machine does not
An animation is displayed on the
operate when
LCD.
button is pressed.
No pattern selected.
Embroidery unit
does not move. The embroidery unit is not set up
correctly.
The flap is still attached.
The embroidery
unit cannot be
The embroidery unit connector
attached.
slot is closed.
The fabric is not fully stretched on
the embroidery frame. The fabric
is loose.
No stabilizer material is attached.
The thread is tangled and the
shuttle, etc., is plugged up.
The thread tension is incorrect.
Objects are placed near the
carriage or embroidery frame.
Embroidery not
neatly done.
Material coming out of the
embroidery frame is causing
problems.
A heavy fabric is being
embroidered, and the fabric is
hanging off the table.
The fabric is catching. It is
pinched.
The carriage was moved while the
embroidery frame was being
removed or attached during
embroidery.
152
Probable Cause Remedy
Adjust the brightness of the LCD.
Touch the LCD with your finger, and
the animation will disappear.
Select a pattern.
Set the embroidery unit up correctly.
Remove the flap.
Pull the embroidery unit connector
slot cover toward you and then push
it all the way in.
Stretch the fabric properly on the
embroidery frame.
Always use stabilizer material for
embroidery with stretch fabrics, thin
fabrics, fabrics with a loose weave
and fabrics where stitches easily
contract.
Remove the tangled thread. When
the shuttle is plugged up, clean it out.
Adjust the tension of the upper
thread.
If the embroidery unit carriage or
embroidery frame bumps into
objects, the pattern will be messed
up. Do not place objects within the
range of embroidery frame motion.
Stretch the fabric on the frame once
again so that the material coming out
of the embroidery frame does not
cause problems, rotate the pattern
and embroider.
If embroidery is done with the fabric
hanging off the table, the embroidery
unit movement will be impaired. Fix
it so the fabric does not hang off.
Stop the sewing machine and set the
fabric up correctly.
If the carriage is moved during the
process, the pattern may be messed
up. Be careful when removing or
attaching the embroidery frame.
Reference
page 155
page 18,
page 38
page 128
page 118
page 118
page 119
page 123
page 122
page 146
page 52
page 119
–
–
–
–