Reclining The Seat; Positioning The Canopy; Adjusting Handle Position - Britax BOB Gear ALTERRAIN User Manual

BOB Gear

Reclining the Seat

When seat is fully reclined,
backward tip-over is more
likely, and may result in injury
to stroller occupant�
NOTE:
Set parking
brake before making
any seat adjustments.
1� Recline Seat
Squeeze the recline button and
pull the seat back down into the
desired position.
2� Return To Upright Position
Grab the rings on either side
of the recline button and pull
the straps out to the sides to
raise the seat.
14

Positioning the Canopy

1� Extend Canopy
Rotate canopy away from
handlebar for additional shade.
2� Retract Canopy
Push canopy toward handlebar.

Adjusting Handle Position

To adjust the handle position,
depress and hold the two
release buttons on the inside of
the handle assembly while raising
or lowering the handle to one of
the individual positions.