Setting The Parking Brake; Securing The Child In The Seat - Britax BOB Gear ALTERRAIN User Manual

BOB Gear

Setting the Parking Brake

The parking brake prevents the
stroller from moving while loading
and unloading. The parking brake
is not designed as a stopping brake.
Locked Position
To set the parking brake, press
down on the foot pedal – making
sure the locking pin fully engages
the locking disk.
NOTE: To ensure the brake is set
properly, attempt to roll the stroller
forward and backward after setting
the brake. If the stroller will not
roll,the brake is set properly.
Unlocked Position
To release the parking brake, lift up
on the foot pedal with your foot until
the brake bar springs up into the
fully unlocked position.
12

Securing the Child in the Seat

1� Set Parking Brake
Rotate parking brake down into
locked position.
NOTE: Rear wheels should
not rotate when parking brake
is set.
2� Place Child In Seat
Slip one shoulder strap over each
shoulder. Position buckle strap
between legs.
Shoulder Strap
Buckle Strap
3� Fasten Shoulder Straps
Insert both shoulder strap
tongues into the buckle.
Buckle
NOTE:
Buckle Strap should
be adjusted to have a snug fit.