Before Installing; Wall Mounting - ViewSonic LD216-251 Quick Start Manual

Introduction

Before Installing

Maintain an adequate air gap between the back of the display and any wall for
proper ventilation.
Ensure there is no direct airflow from air conditioning or heating vents blowing on
the display.
Avoid installing the display in places with high humidity.
Due to high power usage, always use power cords specifically designed for this
product.

Wall Mounting

Installing the Upper and Lower Wall Mount Brackets
50.8
mm
1. Ensure the wall area and size is an appropriate installation site.
NOTE:
The height of the Upper Wall Mount Brackets must not be less than 129.92"
(3.3 meters) from the ground.
2. Using the Wall Mount Bracket (pictured above) as a guide, mark at least twelve (12)
holes and pre-drill them.
3. Install the first Upper Wall Mount Bracket with the provided screws (M6x50mm Ex-
pansion for masonry; TA6x30mm for load bearing wood).
4. Repeat Step 2, ensuring the second Upper Wall Mount Bracket is level with the first
upper bracket.
2336.8
mm
2235.2
mm
2032
mm
1828.8
mm
1625.6
mm
1422.4
mm
1219.2
mm
1016
mm
812.8
mm
609.6
mm
406.4
mm
203.2
mm
7
15
mm
mm
25.4
mm
6
50.8
mm