Install The Ink Tanks - Canon MultiPASS MPC190 Setup Sheet

Install the ink tanks.

1
Start with the black ink tank. Remove the ink tank from its packaging, hold it as
shown below, then remove the protective cap A.
A
2
Insert the black ink tank into the right hand slot. Press firmly on the ink tank's tab
until it clicks into place.
3
Repeat steps 1 and 2 to install the colour ink tank in the left hand slot.
BCI-24 BCI-24
Color Black
4
Close the inner cover.
Be sure to now align the printhead as explained in step 8.
NOTE
• Do not shake or drop the ink tank as the ink may leak and
stain your clothes or hands.
• Do not attempt to reattach the protective cap A once
you remove it.
• Once you remove the protective cap A, do not touch the
ink port B.
B
BCI-24
Black