Install The Ink Tanks - Canon PIXMA MP980 Series Getting Started

4

Install the Ink Tanks

• Do not handle the ink tanks roughly such
as applying them excessive pressure or
dropping them.
• If the Print Head Holder moves to the right,
close and reopen the Scanning Unit (Cover).
• Be sure to use the supplied ink tanks.

1
(2)
Pull the orange tape (1) in the direction of the
arrow to peel off the protective film and remove
the film (2) completely.
2
(A)
(1)
While pressing down with your left thumb, twist
off the orange protective cap (A) located on the
bottom of the ink tank.
• Do not hold the sides of the ink tank; ink may splash.