Table of Contents
Advertisement
Install the software.
IMPORTANT
• DO NOT connect the USB cable before installing the software.
NOTE
• Windows 98/Me users: You need to have "Client for Microsoft Networks" installed before
installing the MultiPASS Suite software. For details, refer to p. 9-1 of the Basic Guide.
• When installing the software in Windows XP or Windows 2000, log onto the system as a
member of the Administrator group.
• If you have previously installed an earlier version of the MultiPASS Suite software
(version 4.3 or earlier), you must remove it before installing this version. For details on
removing the software, refer to the documentation of the previous version.
1
Make sure both your machine and computer are turned on.
2
On your computer, close any open applications, including virus checkers.
3
Insert the MultiPASS Suite CD-ROM into your CD-ROM drive.
• The setup program should start automatically. If it does not, double-click [My
Computer] in the Windows screen, double-click the CD-ROM icon, then double-click
[csplash] or [csplash.exe].
4
When the next screen appears, click
INSTALL MULTIPASS SUITE.
5
Follow the on-screen instructions.
When prompted, remove the label A, then connect a USB cable B (not
6
included) to the machine and computer.
Windows 98/Me/2000
Windows XP
A
B
NOTE
• If you cannot continue
with the installation after
connecting the USB cable,
refer to p. 9-1 of the Basic
Guide.
Advertisement
Table of Contents
