Canon Color imageCLASS MF8170c Network Manual page 18

5
Right-click the selected device ➞ click [Initial Settings] on the pop-
up menu.
2
6
In the [Initial Settings] dialog box, specify the following items ➞
click [Next].
[Subnet]:
[Product Type]:
7
Specify the TCP/IP protocol.
[IP Address Settings with]:
[IP Address]:
[Gateway Address]:
2-8 Preparation for Protocol Settings
If the computer on which NetSpot Device Installer runs is
connected to more than one network, select the subnet that the
desired device belongs to.
Select the product name of your machine. If the product name of
your printer is not displayed, select [imageCLASS MF8170].
Select the method for setting the IP address.
•
[Manual Setting]: You need to set the IP address
•
[DHCP]:
Enter the IP address assigned to the network board.
Enter the gateway address used for the TCP/IP
network.
manually. The IP address that you
enter in [IP Address] is assigned
to the network board.
The IP address is automatically
obtained via DHCP (a DHCP
server needs to be active on the
network).