Setting Preferences In The Twain Driver - Canon imageCLASS MF5550 Software Manual

Setting Preferences in the TWAIN Driver

In the TWAIN driver dialog box, you can specify the following scan settings.
3
[Use Automatic Document Feeder]
[Paper Size]
[Standard Preset]
[Resolution]
[Color Type]
[Contrast]
3-6 Scanning with the TWAIN Driver
Uses the ADF to scan the document. Selecting this check box will
make the maximum scanned area larger.
Selects the scanned area in the pull-down list. Available scanned
areas are as follows:
- For using the platen glass: 4
Custom, US Letter
- For using the ADF: A4, B5, Custom, US Legal, US Letter
Selects the preset scan settings, either [Photo] (the resolution of 300
dpi, Color) or [Document] (the resolution of 200 dpi Black/White).
Selects the scanning resolution in dot per inch. Available resolutions
are as follows:
- For using the platen glass: 50, 72, 100, 150, 200, 300, 400, 500, 600,
1200, 2400, 4800, 9600
- For using the ADF: 50, 72, 100, 150, 200, 300
Selects the scanning color type ([Black/White], [Gray], or [Color]).
Specifies the contrast (–35 to 35%). (Only for color or grayscale
scanning.)
NOTE
You can also adjust the contrast in PageManager or OmniPage if it
is not specified sufficiently in this dialog box.
× ×
6, 6 4, A4, B5, Business Card,