Cisco Catalyst IR1800 Series Installation Manual page 53

Pluggable Interface Modules
This chapter contains the following sections
Introduction to Installing Pluggable Interface Modules
This section describes the equipment and the procedures for successfully installing the Cisco Pluggable
Interface Modules (PIM).
The highlights of the LTE PIM are:
The following images show examples of a pluggable module. In this case, the LTE pluggable module.
Figure 11: LTE Pluggable Module (Front)
1 LTE-Main SMA
2 GNSS SMA
3 Micro USB Debug Port
4 LTE-Div SMA
Introduction to Installing Pluggable Interface Modules, on page 45
Installing a PIM, on page 46
All cellular interfaces are supported through a PIM
We recommend that you use Industrial Temp micro SIMs, 3FF size, that are rated from -40C to +105C
To ensure a reliable contact to the SIM socket, gold-plated SIM cards must be used.
C H A P T E R
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
5
45