Using A Household Power Supply - Canon EOS D60 Instructions Manual

Using a Household Power Supply

You can operate the EOS D60 from a household power outlet by using the DC coupler. This
enables you to use the camera as long as you like without a battery.
●
Do not use any DC coupler other than the one provided with your EOS D30 or
D60 camera.
●
The DC Coupler cannot be used with cameras other than the EOS D30 and
D60.
26
Inserting and Removing the Battery Pack
1 Connect the DC coupler.
●
Plug the DC coupler into the compact
power adapter.
2 Place the cord in the groove.
●
Carefully insert the cord into the groove.
Insert the DC coupler into the
3
camera.
●
Open the cover (→24) and lower the
covering on the cord hole.
●
Insert the DC coupler and fit the cord into
the cord hole.
●
Check that the cord is placed tightly in the
cord hole, and slide the DC coupler into the
chamber until it locks into place.
●
Close the cover so that it clicks into place.
4 Connect the power cord.
●
Connect the power cord to the compact
power adapter.
●
Plug the cord into a power outlet.
●
When you are finished, remove the plug
from the power outlet.