Using A Household Power Supply - Canon EOS D30 User Manual

Using a Household Power Supply

You can operate the EOS D30 from a household power outlet by using the DC coupler. This
enables you to use the camera as long as you like without a battery.
Do not use any DC coupler other than the one provided with your EOS D30
camera.
Do not use the DC coupler provided with your EOS D30 with any other camera.
Inserting and Removing the Battery Pack
1
Connect the DC coupler.
Plug the DC coupler into the compact
power adapter.
2 Place the cord in the groove.
Carefully insert the cord into the groove.
3 Insert the DC coupler into the camera.
Open the cover ( 27) and lower the
covering on the cord channel.
Insert the DC coupler and fit the cord into
the cord channel.
Check that the cord is placed tightly in the
cord channel, and slide the DC coupler
into the chamber until it locks into place.
Close the cover so that it clicks into place.
4 Connect the power cord.
Connect the power cord to the compact
power adapter.
Plug the cord into a power outlet.
When you are finished, remove the plug
from the power outlet.
1
29